Reference: 12jzoilpan
Brand: ADAMAT PERFORMANCE
1JZ 2JZ GE GTE CUSTOM REAR OIL SUMP / OIL PAN KIT SWAP E36/E46/Z3/Z4
Reference: M62SWAPADAM
Brand: ADAMAT PERFORMANCE
Custom oil sump / pan kit V8 M60/M62/S62 for swap BMW E36 E46 Z3
Reference: N54CUTCHEXTR
Brand: ADAMAT PERFORMANCE
Clutch kit up to 1040Nm, 1150Nm, 1300Nm, 1570Nm, 1700Nm of torque
Your purchase is secured by PayPal and Stripe payment system!
Fully insured delivery service by DPD or Parcelforce!
You can always return your UNUSED item for a full refund!
The product was designed and manufactured in Poland and product design belongs exclusively to COELMOTORSPORT. Available on the European market under the CLM and DRIFTMAX brands.
Note: sets for each car model differ in dimensions and cannot be used interchangeably. In the case of E30 the set only fits under the so-called 5×120 conversion, i.e. to E36 or E46 switches.
Correct (optimal) CLM suspension settings:
Camber: -1 degree
Caster: 4 degree
Toe: optimal 0/0 or 15 minutes per wheel (30 minutes overall) for better dynamics
Steering kit BMW E30 / E36 / E46 – 60+ degrees of steer.
Set contains:
2 +35 mm lower arms with the best MEYLE HD bolts
2 lock adapters with a set of cantering sleeves and screws
2 rear lower arm mounts (made of steel with Strongflex long polyurethanes with smaller diameter)
2 steering rods with E46 rod ends (same for all sets)
2 upper coil over relocators (suitable for models E30 / E36 / E46 / E8x / E9x)
2 stainless steel lock limiters
detailed instruction manual
Reference: CLMkit30
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: LSE46-80-R
Brand: PMC Motorsport
PMC Motorsport Aluminium rear sway bar links BMW E46 / E46 compact - Polyurethane 80ShA
Reference: CNC71-ZS-E30-4-BK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (4x100) - BASIC KIT
Reference: CNC71-AS-GS300
Brand: CNC71
CNC71 set of adapters for the Lexus GS generation I (JZS147) and generation II (JZS160) and Lexus LS (UCF10) a mounting bolts for the factory control arms
Reference: CNC71-AS-350Z
Brand: CNC71
CNC71 simple, lightweight, and effective solution for increasing the front steering lock angle for Nissan 350Z/Infiniti G35. Up to 62 degrees of steering angle can be achieved.
Reference: CNC71-ZS-E36-BK
Brand: CNC71
CNC71 Steering lock kit BMW E36 - BASIC KIT
Reference: CNC71-AS-E36-S
Brand: CNC71
CNC71 a set of steel adapters with a mounting bolts for the factory control arms for E36
Reference: CLMkit46+bc
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: CNC71-ZS-E30-5-BK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (5x120) - BASIC KIT
Reference: STEERINGCOLE46
Brand: Cybul Radical Solutions
This product is a must-have when swapping any V8 into an E46/Z4 or E36/Z3
Reference: CNC71-AS-E46-PnP
Brand: CNC71
CNC71 set of adapters with a set of mounting bolts for the factory control arms for E46
Reference: CNC71-ZS-E89-FK
Brand: CNC71
CNC71 front suspension set dedicated to BMW 1 Series E81 E82 E87 E88 and BMW 3 Series E90 E91 E92 E93
Reference: CNC71-350-05
Brand: CNC71
Front suspension kit - PRO KIT manufactured by CNC71, dedicated to the Nissan 350Z and Infiniti G35
Reference: LSE46-80-Y
Brand: PMC Motorsport
PMC Motorsport Aluminium rear sway bar links BMW E46 / E46 compact - Polyurethane 90ShA
Reference: CNC71-ZS-E30-4-FK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (4x100) - FULL KIT
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent