Reference: 12jzoilpan
Brand: ADAMAT PERFORMANCE
1JZ 2JZ GE GTE CUSTOM REAR OIL SUMP / OIL PAN KIT SWAP E36/E46/Z3/Z4
Reference: M62SWAPADAM
Brand: ADAMAT PERFORMANCE
Custom oil sump / pan kit V8 M60/M62/S62 for swap BMW E36 E46 Z3
Reference: N54CUTCHEXTR
Brand: ADAMAT PERFORMANCE
Clutch kit up to 1040Nm, 1150Nm, 1300Nm, 1570Nm, 1700Nm of torque
Reference: CNC71-TU-E346-WW-M
Brand: CNC71
Your purchase is secured by PayPal and Stripe payment system!
Fully insured delivery service by DPD or Parcelforce!
You can always return your UNUSED item for a full refund!
A set of adapters with a mounting bolts for the factory control arms.
Adapters are milled on CNC machines, which gives a high quality finish and 100% matching of the adapter to the steering knuckle and pin ends. For E36 the adapters are made of the hardest aluminium acc.
During assembly, the steering rod and tie rod end should be shortened by 1 centimetre, bodywork remains intact.
The minimum inside diameter of the rim to fit the adapter is 370mm.
Adapters extend the spacing by 2 cm per side. To obtain approximately 55 degrees of lock.
The kit includes:
Reference: CLMkit36
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: CLMkit46+bc
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: CLMkit30
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: clmminikit
Brand: Coel Motorsport
CLM Lock Kit for BMW E30 / E36 / E46 with lock adapters for stock knuckles/ hubs 5×120 E36 / E46
Reference: CNC71-ZS-E89M-FK
Brand: CNC71
CNC71 Steering lock kit BMW 1M E82 / M3 E90 E92 E93 - FULL KIT
Reference: clme90kit
Brand: Coel Motorsport
This lock kit is made by CNC machines using laser cutting, turning, grinding, hardening methods.
Reference: CNC71-AS-GS300
Brand: CNC71
CNC71 set of adapters for the Lexus GS generation I (JZS147) and generation II (JZS160) and Lexus LS (UCF10) a mounting bolts for the factory control arms
Reference: CNC71-ZS-E30-4-FK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (4x100) - FULL KIT
Reference: CLMkit46
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: CNC71-AS-E36M
Brand: CNC71
CNC71 set of adapters with a mounting bolts for the factory control arms for BMW E36 M3
Reference: CNC71-ZS-E30-5-FK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (5x120) - FULL KIT
Reference: CNC71-AS-E36-S-PnP
Brand: CNC71
CNC71 set of steel adapters with a set of mounting bolts for the factory control arms for E36
Reference: CNC71-AS-E46-S-PnP
Brand: CNC71
CNC71 set of steel adapters with a set of mounting bolts for the factory control arms for E46
Reference: DSquick
Compatible with Sparco, Nardi, DriftShop, Personal, OMP, Momo, etc.
Reference: CNC71-ZS-E36M-FK
Brand: CNC71
CNC71 Steering lock kit BMW E36 M3 - FULL KIT
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
