Reference: 12jzoilpan
Brand: ADAMAT PERFORMANCE
1JZ 2JZ GE GTE CUSTOM REAR OIL SUMP / OIL PAN KIT SWAP E36/E46/Z3/Z4
Reference: M62SWAPADAM
Brand: ADAMAT PERFORMANCE
Custom oil sump / pan kit V8 M60/M62/S62 for swap BMW E36 E46 Z3
Reference: N54CUTCHEXTR
Brand: ADAMAT PERFORMANCE
Clutch kit up to 1040Nm, 1150Nm, 1300Nm, 1570Nm, 1700Nm of torque
Reference: CNC71-TU-E346-WW-M
Brand: CNC71
Your purchase is secured by PayPal and Stripe payment system!
Fully insured delivery service by DPD or Parcelforce!
You can always return your UNUSED item for a full refund!
A set of steel BMW E36 adapters with a set of mounting bolts for the factory control arms.
Adapters are milled on CNC machines, which gives a high quality finish and 100% matching of the adapter to the steering knuckle and pin ends.
The adapters are protected with a zinc coating.
During assembly, the steering rod and tie rod end should be shortened by 1 centimetre, bodywork remains intact.
Depending on knuckle wear and differences in castings there is a possibility that you may need to shorten the bolt securing the adapter to the knuckle. It's for making sure that it won't come into contact with the shock mounting bracket.
CNC71 fits its adapters to Meyle ball joints cone spec. CNC71 has noticed that different manufacturers can have different machining tolerances. Due to this fact, it may happen that the ball joint mounting thread will protrude from the adapter and you may not be able to bolt it down securely. If that's the case, use a washer to space the nut and you'll be good to go.
The minimum inside diameter of the rim to fit the adapter is 370mm.
Adapters extend the spacing by 2 cm per side. To obtain approximately 55 degrees of lock.
The kit includes:
Reference: CNC71-089-01
Brand: CNC71
PRO KIT CNC71 front suspension set dedicated to BMW 1 Series E81 E82 E87 E88 and BMW 3 Series E90 E91 E92 E93
Reference: CNC71-AS-IS200-PnP
Brand: CNC71
CNC71 set of adapters for the Lexus IS series 1 generation with a set of mounting bolts for the factory control arms
Reference: CNC71-ZS-E46-PK
Brand: CNC71
CNC71 front suspension PRO kit is designed specifically for the BMW E46, increasing steering angle of up to 70 degrees
Reference: CNC71-AS-E46-S
Brand: CNC71
CNC71 a set of steel adapters with a mounting bolts for the factory control arms for E46
Reference: CNC71-ZS-E30-5-FK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (5x120) - FULL KIT
Reference: CNC71-ZS-E36-FK
Brand: CNC71
CNC71 Steering lock kit BMW E36 - FULL KIT
Reference: CLM-LAO-E46
Brand: Coel Motorsport
A set of CNC cut lower arms. The bolt-to-bolt dimension - 408 mm. Widened by 45 mm compared to the stock, allows to increase the steering angle up to over 60 degrees.
Reference: CLMkit30
Brand: Coel Motorsport
Huge lock angle of 70 degrees
Reference: AK-MER-W204-71
Brand: FAT - Funo Auto tuning
This fully adjustable kit is designed to provide exceptional steering angle and precision
Reference: CNC71-ZS-E30-4-BK
Brand: CNC71
CNC71 Steering lock kit BMW E30 (4x100) - BASIC KIT
Reference: DSquick
Compatible with Sparco, Nardi, DriftShop, Personal, OMP, Momo, etc.
Reference: CP200SX-GE
Brand: PMC Motorsport
PMC Motorsport Aluminium Adjustable Camber plates / Front Adjustable Top Mount Nissan 180SX 200SX / Coilover Suspension
Reference: CNC71-ZS-E36-BK
Brand: CNC71
CNC71 Steering lock kit BMW E36 - BASIC KIT
Reference: CNC71-AS-E36-PnP
Brand: CNC71
CNC71 set of adapters with a set of mounting bolts for the factory control arms for E36
Reference: LSE46-80-Y
Brand: PMC Motorsport
PMC Motorsport Aluminium rear sway bar links BMW E46 / E46 compact - Polyurethane 90ShA
Reference: CNC71-ZS-E46-FK
Brand: CNC71
CNC71 Steering lock kit BMW E46 - FULL KIT
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
